Most Orlando homeowners pay between $1.50 and $3.00 per square foot for professional paver sealing, which includes cleaning, joint resanding, and sealer application. For a typical 500- to 1,000-square-foot driveway or pool deck, the total cost ranges from $750 to $3,000. If your pavers have a failed old sealer that needs stripping first, expect to pay $3.50 to $5.00 per square foot.
What Does Paver Sealing Actually Cost in Orlando?
Paver sealing prices in Orlando depend on your pavers’ needs. A straightforward clean, sand, and seal job runs $1.50 to $3.00 per square foot. Pavers that have been sealed before and need the old coating removed cost more.
Here is what Orlando homeowners are paying in 2026:
| Service Type | Price Per Sq Ft | Typical Project Cost | What’s Included |
| Standard Clean, Sand & Seal (Brick Pavers) | $1.50 – $3.00 | $750 – $3,000 | Pressure cleaning, joint re-sanding, water-based sealer |
| Natural Stone Sealing (Travertine, etc.) | $2.00 – $3.50 | $1,000 – $3,500 | Specialized cleaning, impregnating sealer application |
| Paver Stripping & Resealing | $3.50 – $5.00 | $1,750 – $5,000 | Chemical stripping of failed sealer, full cleaning, re-sanding, resealing |
| DIY Sealer Material Only | $0.15 – $0.30 | $75 – $300 | Sealer product only. No labor, cleaning, or sanding included. |
You might see other Orlando companies quoting $4 to $10 per square foot. Those numbers often come from paver installation companies, not sealing specialists, or from outdated blog posts that no longer reflect current market pricing. The $1.50 to $3.00 range is what you should expect from a dedicated paver sealing company in Orlando in 2026.
What Factors Affect Paver Sealing Cost?
Seven factors determine what you will pay for paver sealing in Orlando. Some are straightforward. Others catch homeowners off guard.
Square Footage
This is the biggest cost driver. A 400-square-foot front porch costs less than a 1,500-square-foot pool deck-and-driveway combination. Larger projects sometimes fall at the lower end of the per-square-foot range because setup time remains the same regardless of size.
Current Paver Condition
Pavers in decent shape, with light dirt and minimal weed growth, fall on the lower end of the price range. Pavers with heavy staining, significant weed infestation, or years of neglect require more labor during the cleaning phase, which increases costs.
Stripping a Previously Sealed Surface
This is where costs jump significantly. If a previous contractor applied the wrong sealer, or if an old coating has turned white, cloudy, or started peeling, the entire surface needs to be chemically stripped before any new sealer can go down.
We use a commercial-grade coating removal process that penetrates and softens multiple layers of failed sealers, topical coatings, and residual polymeric joint sand. The goal is to restore the paver surface to a clean, residue-free condition before re-sanding and resealing.
Stripping runs $3.50 to $5.00 per square foot, and these jobs can take two to three days instead of the single day a standard job requires. If you need paver stripping services, get an in-person estimate so the full scope of work can be assessed.
Paver Material: Brick vs. Natural Stone
Brick pavers and natural stone require completely different sealing approaches, which affects pricing.
For brick pavers, we use water-based sealers exclusively. The process is clean, sand, and seal. Finishes range from a wet look to a matte to a natural finish, depending on what the homeowner prefers.
Natural stone like travertine requires a specialized impregnating sealer that is fundamentally different from what goes on brick pavers. These sealers create a transparent, non-film-forming barrier that repels water and oil without changing the stone’s natural appearance. Using the wrong type of sealer on natural stone, particularly a topical film-forming product, can cause slipperiness, peeling, and other costly failures. That specialized process is why travertine and natural stone sealing costs a bit more.
Type of Sealer Used
Water-based sealers are the standard for brick pavers in Orlando. They protect the surface, enhance color, and hold up well in Florida’s climate. The finish you choose (wet look, matte, or natural) can slightly affect the price, and higher-quality commercial-grade sealers cost more upfront but tend to last longer.
Location and Accessibility
Pool decks inside screen enclosures, driveways with limited access, and sloped surfaces all affect how long the job takes. Anything that needs to be moved beforehand, like patio furniture, grills, or potted plants, adds time. Vehicles must always be out of the driveway before work begins.
Orlando’s Climate
Orlando receives over 50 inches of rainfall per year, and that constant moisture cycle is one of the biggest reasons paver sealing is so common in Central Florida. High humidity promotes the growth of algae and mold on unsealed surfaces. UV exposure fades unprotected pavers over time. Sealed pavers resist all three of these threats, which is why most Orlando homeowners treat sealing as routine maintenance rather than a luxury.
What’s Included in a Professional Paver Sealing Job?
Professional paver sealing is not just rolling on a coat of product. There are three distinct steps, and each one matters.
Step 1: Cleaning. The entire paver surface is thoroughly pressure-washed to remove mold, dirt, weeds, and other organic contaminants. This is done with commercial-grade, trailer-mounted equipment designed for heavy-duty cleaning.
Step 2: Re-sanding the joints. After cleaning, sand is hydro-compacted into the paver joints. This step stabilizes the pavers, prevents shifting, and keeps weeds from growing back as quickly. Skipping this step is one of the most common mistakes in cheap paver sealing jobs. You can read more about why sand stabilization matters for Florida paver jobs.
Step 3: Sealing. Commercial-grade, water-based sealer is applied to the clean, sanded surface. The sealer creates a breathable, waterproof barrier that protects against UV damage, staining, and moisture penetration.
Most standard jobs are completed in a single day. We show up with everything trailer-mounted and ready to go.
DIY vs. Professional Paver Sealing: Is It Worth Hiring a Pro?
Buying sealer yourself costs $0.15 to $0.30 per square foot for materials. For a 500 square foot area, that is $75 to $150. Professional sealing for that same area runs $750 to $1,500. The price gap is real, so it is fair to ask whether hiring a pro is worth it.
Here is the honest comparison:
| Factor | DIY Paver Sealing | Professional Paver Sealing |
| Material Cost | $0.15 – $0.30/sq ft | Included in service price |
| Total Cost (500 sq ft) | $75 – $150 | $750 – $1,500 |
| Cleaning Included | No (additional equipment needed) | Yes, commercial-grade pressure washing |
| Joint Re-Sanding | No (must purchase separately) | Yes, included |
| Equipment Needed | Sprayer, brushes, sealer | All professional-grade, trailer-mounted |
| Application Quality | Varies widely | Consistent, experienced application |
| Risk of Failure | High (wrong product, poor prep) | Low (proven process, quality products) |
| Time Required | Full weekend + drying time | Completed in a single day |
| Warranty | None | Workmanship warranty with maintenance |
The biggest risk with DIY is not the sealer cost. It is choosing the wrong product for your paver type, skipping the cleaning and sanding steps, or applying unevenly. A failed DIY sealer job does not just look bad. It means you will eventually pay $3.50 to $5.00 per square foot for professional stripping before the pavers can be sealed correctly. You can weigh more factors in our guide to the pros and cons of paver sealing.
How Long Does Paver Sealer Last in Orlando?
Two to four years. That is the honest answer based on what we see in the field every day.
Some companies will tell you three to five years. We prefer to set realistic expectations. How long your sealer lasts depends on sun exposure, foot traffic, the type of paver, and Orlando’s weather. A shaded pool deck with light traffic may hold up closer to four years. A south-facing driveway that gets full sun and daily vehicle traffic may need attention every two.
The best way to extend the life of your sealer is to perform maintenance cleaning every 12 to 15 months. We offer a maintenance program designed specifically for this. Regular cleanings remove the buildup of dirt, algae, and organic material that breaks down the sealer over time. Homeowners on a maintenance schedule consistently get more life out of their sealed surfaces. For a deeper look at resealing timing, check out our post on how often Orlando residents should reseal their pavers.
How to Avoid Overpaying for Paver Sealing
Not all quotes are created equal, and price alone does not tell you much.
If someone quotes $0.40 per square foot for paver sealing, that should raise a red flag. At that price, they are almost certainly skipping the sanding step, using low-quality sealer, or not doing a proper cleaning beforehand. The result is a sealer that fails within months instead of years.
On the other hand, if you are quoted $10 per square foot for standard brick paver sealing in Orlando, you are likely looking at a paver installation company rather than a sealing specialist. That pricing includes overhead for services you do not need.
A fair quote for standard clean, sand, and seal work in Orlando ranges from $1.50 to $3.00 per square foot. Here is what to look for in a reputable company:
In-person estimates for the majority of jobs. Paver sealing requires a visual inspection because conditions vary widely from one property to the next. A company that quotes without seeing your pavers is guessing.
A clear process explanation. You should know what steps are included, what sealer type will be used, and how long the job will take.
Reviews from real customers. Look for volume and consistency. A company with hundreds of five-star reviews has a track record you can trust.
Proper equipment. Trailer-mounted, commercial-grade machines designed for paver work. Consumer-grade equipment produces inconsistent results.
The hidden cost of choosing the cheapest option is often a failed sealer that requires professional stripping at $3.50 to $5.00 per square foot. Spending a little more upfront for quality work saves money in the long run. We cover more of these warning signs in our guide to avoiding paver sealer disasters in Orlando.
Frequently Asked Questions
Should you seal your pavers in Florida?
Florida’s combination of 50-plus inches of annual rainfall, intense UV exposure, and year-round humidity creates some of the harshest conditions for outdoor hardscaping in the country. Sealing protects against moisture absorption, which slows erosion and limits weed growth between joints. It also makes pavers significantly easier to clean and resistant to organic staining from mold and algae. For most Florida homeowners, sealing is one of the highest-return investments they can make in their outdoor surfaces.
Why is paver sealing more expensive than regular pressure washing?
A standard pressure wash runs roughly $0.15 to $0.75 per square foot. Paver sealing includes the same level of cleaning and also adds joint resanding with specialized sand and the application of a commercial-grade sealer. The equipment requirements are different, the products are more expensive, and the process takes significantly more time and expertise. Three separate services are bundled into a single job, which is why the price is higher than for cleaning alone.
How long does paver sealer take to dry?
Water-based sealers, the type most commonly used on brick pavers in Central Florida, are typically walkable within three to four hours. Full curing takes 24 to 48 hours, depending on humidity and temperature. During that curing window, keep foot traffic, pets, and sprinkler systems away from the sealed surface. Solvent-based sealers used in certain applications may require up to 72 hours for full cure.
Can paver sealing increase my home’s value?
The median home value in the Orlando metro area is between $370,000 and $410,000. A well-maintained driveway and pool deck create a strong first impression that buyers notice immediately. Paver sealing costs $750 to $2,500 for most residential projects, a fraction of the home’s value, yet protects hardscaping worth far more. Sealed pavers also signal to buyers that the home has been well cared for, which can influence offers.
Get a Free Paver Sealing Estimate in Orlando
Every paver surface is different, which is why we provide free in-person estimates for the majority of our projects. We will assess your pavers, explain exactly what is needed, and give you a straightforward price with no surprises. We back every job with a 100% satisfaction guarantee. Call us at 407-853-2020 to schedule your estimate.
